Instructions

PLAYSTATION 4

How to Use The Adjustable Trigger Stops

1. 1. Locate holes on rear of controller just below the triggers.
   2. Insert included tool into the screw in the hole.
   3. Tighten (turn clockwise) the screw to Lengthen pull range.
   4. Loosen (turn counterclockwise) the screw to Reduce pull range

How to Use The Re-map Chip

1. 1. Press and hold the track pad until the LED blinks, then release.
   2. Press and release any face button*. The LED will blink.
   3. Press and release any rear button. The LED will blink.
   4. Repeat steps 2-3 for additional buttons.
   5. Press and hold the track pad until it blinks, then release.

*face buttons include X, O, Square, Triangle, L1, R1, L3, R3, D-up, D-down, D-left, D-right.

XBOX ONE

How to Use The Adjustable Trigger Stops

1. 1. Remove side panels with included pry tool.
   2. Insert included allen tool into screw.
   3. Tighten (turn clockwise) the screw to Lengthen pull range.
   4. Loosen (turn counterclockwise) the screw to Reduce pull range.
   5. Snap side panels back into place.

How to Use The Re-map Chip

1. 1. Press and hold the view button. The LED will blink.
   2. Press and release any face button*. The LED will blink.
   3. Press and release any rear button. The LED will blink.
   4. Repeat steps 2-3 for additional buttons.
   5. Release the View button.

*face buttons include A, B, X, Y, LB, RB, L-thumbstick press, R-thumbstick press, D-up, D-down, D-left, D-right.